Carpet to Hardwood Floors Chicago: Complete Guide 2026 | FLOORecki

Floorecki — Thu, 25 Jun 2026 01:53:45 +0000

Removing carpet and revealing hardwood floors underneath is one of the most satisfying home improvements a Chicago homeowner can make — and one of the most unpredictable. After 18 years doing this across Chicago and suburbs, here's exactly what to expect: what's under that carpet, what it costs, and what surprises come up after the first nail is pulled.

In this guide

What's actually under your carpet in Chicago Refinish existing hardwood vs. install new floors The process — step by step Surprises that come up after carpet removal What if there's carpet on your stairs? Should you keep carpet upstairs? Costs in Chicago 2026 Recent FLOORecki projects FAQ

What's Actually Under Your Carpet in Chicago

The first question everyone asks: is there hardwood under my carpet? In Chicago, the answer depends heavily on when your home was built.

Home Era	What's typically underneath
Pre-1960s (bungalows, two-flats, graystones)	Almost always original hardwood — usually narrow red oak or maple strip flooring
1960s–1980s construction	50/50 — could be hardwood or plywood subfloor. Carpet was popular as a primary flooring choice during this era.
Post-1990s construction	Usually plywood subfloor only — hardwood wasn't standard. New installation required.

  The most common mistake we see at estimates: A homeowner lifts the carpet in one corner of the room, sees beautiful hardwood, and assumes the whole floor is the same. We arrive and find that half the floor was replaced with plywood at some point — maybe from water damage, a previous renovation, or a missing section nobody documented. Always check multiple spots before committing to refinishing.

Refinish Existing Hardwood vs. Install New Floors

If there is hardwood under your carpet, the next decision is whether to refinish it or rip it out and start fresh. This isn't always obvious — here's how we think about it.

✅ Refinish the existing hardwood when:

→ Repairs needed are minor (a few boards)

→ Wood is thick enough for sanding (solid hardwood)

→ Client is OK with some natural character

→ Existing species and width matches adjoining rooms

→ No significant water damage or structural issues

⚠️ Install new hardwood when:

→ Large sections are damaged or missing

→ So many repairs needed that cost approaches new install

→ Significant water damage throughout

→ Wood is too thin for another sanding

→ Client wants squeak-free floor guaranteed

  The honest math: If repairs are extensive, the labor to fix and refinish can cost as much as tearing it out and installing new. New hardwood gives you a floor that won't squeak, looks consistent throughout, and has full sanding life ahead of it. Sometimes starting fresh is simply the smarter investment.

A Note on Squeaking

Old hardwood under carpet almost always has some squeak — the subfloor connection has loosened over decades. If a client is OK with some squeaking and there are no major repairs needed, we can often refinish and make it look beautiful. If squeaking is a dealbreaker, new installation with proper subfloor prep and screwing is the right call.

The Process — Step by Step

On-site evaluation

We lift carpet in multiple spots — not just one corner — to assess the full floor condition. We check for water damage, missing sections, previous repairs, and thickness. This is where we give you an honest assessment of refinish vs. new install.

Carpet & tack strip removal

Carpet, padding, and tack strips come out. Included in our project pricing. Old carpet is bagged and removed from the property.

Subfloor assessment & prep

If there's no hardwood underneath, this step is critical. We sand down plywood edges, screw down any loose sections to eliminate future squeaking, and address unevenness — especially near windows, exterior doors, and walls where water infiltration is most common in Chicago homes.

Carpet residue removal (refinishing only)

Old carpet leaves adhesive, staples, and padding residue on the hardwood. This requires extra sanding passes before the real refinishing work begins — and it's one of the reasons carpet-to-hardwood refinishing takes more time than a standard refinish. We factor this into our quote upfront.

Repairs & board replacement

Any damaged, stained, or missing boards are replaced at this stage. For older Chicago floors where the original wood is no longer available, we use a pro trick: pull boards from a closet where they'll never be seen and use them in the main living area, then install new wood in the closet. Most clients are amazed by how seamless this looks.

Sanding & color sampling

Full sand to bare wood, then 3–5 stain samples applied on your actual floor in different lighting conditions — including sealer and finish coat so you see the true final color before committing.

Stain + Bona Traffic HD finish

Your chosen stain color applied, followed by multiple coats of Bona Traffic HD — commercial-grade, low VOC, fast drying. Walk on the floor within 24 hours, move furniture back in 72 hours.

Surprises That Come Up After Carpet Removal

🔴 Missing Floor Sections

The most common surprise: the corner looks perfect but the middle of the room has a section covered with plywood — from an old HVAC vent, a previous water leak, or a long-forgotten renovation. When this happens, we present options with pricing before doing any additional work.

🔴 Water Damage You Didn't Know About

Carpet hides water damage beautifully — until it comes up. Most common locations in Chicago homes: near exterior walls, under windows, near exterior doors. Before any hardwood installation, we check these areas carefully. Active moisture is a project stopper — hardwood installed over wet subfloor will fail within months.

Important: If we find evidence of water damage under carpet, we will not proceed with installation until the source is identified and resolved. Installing hardwood over a moisture problem is a guaranteed failure. We'd rather have that conversation upfront than have you call us back in six months.

🟡 Color Matching Challenges

Old-growth red oak from a 1920s Chicago bungalow has a grain, density, and color that simply doesn't exist in new lumber. Our solution: pull boards from a closet where the original wood still exists, use those in the visible living space, and install new wood in the closet. Nobody ever opens their closet and says "this floor doesn't match."

What If There's Carpet on Your Stairs?

Carpeted stairs are extremely common in Chicago homes — and removing that carpet is one of the most impactful upgrades you can make. The transformation from carpet to hardwood stairs is dramatic and immediately visible the moment you walk through the front door.

What's Under Stair Carpet in Chicago?

Home Type	What's typically under stair carpet
Older Chicago homes (pre-1970s)	Original hardwood treads — usually red oak. Often in good condition and refinishable.
Newer construction (post-1980s)	Pine treads or basic 2x8 pine boards. Pine is a soft wood — it dents and scratches quickly. Replacement with oak treads is strongly recommended.

  Why pine stair treads need to be replaced: Pine is a softwood — every heel strike, dog nail, and toy leaves a visible dent or scratch. Oak is 3–4x harder and holds up to decades of stair traffic. If you have pine treads under your carpet, installing new red oak treads is almost always the better investment over refinishing pine.

The Stair Carpet Removal Process

Carpet & tack strip removal — carpet and padding come off each tread and riser individually
Structural check — this is the perfect moment to tighten any loose joints and address squeaking before cosmetic work begins. Re-screwing and adding construction adhesive to loose stairs eliminates squeaks permanently.
Decision: refinish or replace treads — based on wood species and condition
New oak treads (if needed) — red oak treads installed, finished with Bona Traffic HD
White painted risers — standard in Chicago homes, matches baseboards and other painted trim throughout
Spindle update (optional) — wood-to-black-iron spindle replacement is one of our most popular stair upgrades

The Safety Question: Stair Runner or No Runner?

Some clients want the clean hardwood look but are concerned about slip safety — especially with kids or elderly family members. Two options:

  Option 1 — Bona Anti-Slip finish: We apply Bona's anti-slip coating specifically formulated for stair treads. This gives you the clean hardwood look with added grip — no runner needed. This is our most recommended solution for clients who want both aesthetics and safety.

  Option 2 — Stair runner: A center carpet runner with exposed hardwood on both sides. This is a very popular Chicago look — you get the warmth and safety of carpet in the walking zone with the elegance of hardwood borders. It's also practical: the runner protects the center of the tread from the highest-traffic wear.

Carpet on Your Stairs Too?

We inspect whether refinishing or replacing your stair treads is the better investment — and give you a clear quote for both options. Most stair projects are done in 2–3 days.

Get Your Stair Estimate → Or call / text: 773-790-3887

Should You Keep Carpet Upstairs?

This is one of the most common questions we get — and there's no single right answer. After 18 years, here's our honest take.

🪵 Arguments for hardwood upstairs

→ Easier to clean — no allergens, pet hair, dust trapped in fibers

→ Better for allergy sufferers

→ Consistent look throughout the home

→ Higher resale value — buyers generally prefer hardwood

→ Lasts longer — hardwood refinished vs. carpet replaced every 10–15 years

🏠 Arguments for carpet upstairs

→ Warmer underfoot — especially in Chicago winters

→ Quieter — better sound absorption between floors

→ Cozier feel in bedrooms — many people prefer it

→ Safer for kids — softer landing if someone falls

→ Lower upfront cost

  The Chicago standard we see most often: Hardwood on the main floor and stairs, carpet in the bedrooms. This is by far the most common configuration in Chicago homes — and it makes a lot of sense. You get the visual impact and easy cleaning of hardwood where guests see it, and the comfort and warmth of carpet where you actually sleep. Some clients even do hardwood hallways upstairs with carpet only in the bedrooms themselves.

If resale value is your primary concern — go hardwood throughout. Buyers consistently prefer it and it photographs better for listings. If personal comfort matters more — the bedroom carpet combination is a perfectly sensible choice that most Chicago homeowners are very happy with long-term.

Carpet to Hardwood Costs in Chicago 2026

Service	Price Range
Carpet removal (included in project)	Typically included
Hardwood refinishing (existing under carpet)	$4.00 – $5.75 / sq ft
Extra sanding for carpet residue	+$0.50 – $1.00 / sq ft
New hardwood installation (no existing floor)	$3.00 – $5.00 / sq ft labor
Board replacement (individual boards)	$25 / board
Stair tread refinishing	$60 – $70 / tread
New oak stair tread installation	$250 – $400 / tread
White painted risers	$35 – $45 / riser
Iron spindle replacement	$25 / spindle
Minimum charge (under 300 sq ft)	$850

Get Your Instant Carpet to Hardwood Estimate

Select "Floor Refinishing" or "Floor Installation" in our Instant Quote tool for a ballpark price — under 60 seconds, no phone call needed.

Calculate My Project Cost → Or call / text: 773-790-3887 · Same-day response

Recent FLOORecki Projects

📍 Logan Square, Chicago

Carpet Removal + Hardwood Refinishing + Stair Renovation

Classic Chicago bungalow with original narrow red oak under carpet throughout the main floor and stairs. Carpet removed to reveal beautiful grain — with one section near the back door showing water damage. We replaced damaged boards using original boards pulled from the bedroom closet. Stair treads refinished to match; risers painted white to match baseboards. Iron spindles replaced for a modern update.

Scope680 sq ft + 14 stairs

StainDuraSeal Weathered Oak

StairsRefinished treads + white risers + iron spindles

FinishBona Traffic HD

📍 Schaumburg, IL

Carpet Removal + New Hardwood + New Oak Stair Treads

1980s ranch home — plywood subfloor on main floor, pine stair treads on the staircase. Pine is too soft for high-traffic stairs — every shoe leaves a mark. We installed new red oak throughout the main floor and replaced all pine treads with new red oak treads. Risers painted white, iron spindles added. Finished with Bona NaturalSeal + Traffic HD throughout for a seamless look.

Scope920 sq ft + 13 stairs

SealerBona NaturalSeal

StairsPine treads replaced with red oak

FinishBona Traffic HD

📍 Oak Park, IL

Carpet Removal + Hardwood — Mixed Condition Discovery

Client lifted carpet in one corner and showed us perfect hardwood. When we removed the full carpet, we found two sections covered in plywood — previous owners had patched over damage. We presented options: repair with matching boards (expensive) or full new installation (cleaner result, similar cost). Client chose new installation. Carpet on the stairs was also removed and original oak treads refinished — they were in better condition than the floors.

Scope750 sq ft + 12 stairs

StainProvincial

StairsOriginal oak — refinished, white risers

DecisionNew floor install — cleaner result at similar cost

Frequently Asked Questions

Is there hardwood under my carpet in Chicago?

If your home was built before 1960, there's a very good chance — original narrow red oak or maple strip flooring was standard in Chicago bungalows, two-flats, and graystones. Homes from the 1960s–1980s are 50/50. Post-1990s construction typically has plywood subfloor only. The only way to know for sure is to lift the carpet in several spots — not just one corner.

What's under stair carpet in Chicago homes?

In older Chicago homes (pre-1970s), it's almost always original hardwood treads — usually red oak that can be refinished. In newer construction, it's often pine — a softwood that dents and scratches easily. Pine stair treads should be replaced with red oak, not refinished. We assess this at the estimate so you know exactly what you're working with before any work starts.

How much does it cost to remove carpet and refinish hardwood in Chicago?

Carpet removal is typically included in the project. Refinishing existing hardwood runs $4.00–$5.75 per sq ft, with an additional $0.50–$1.00/sq ft if there's significant carpet adhesive or residue. Stair tread refinishing is $60–$70 per tread; new oak tread installation runs $250–$400 per tread. Board replacements are $25 per board for individual boards.

Are hardwood stairs slippery? Is it safe to remove stair carpet?

This is a real concern — especially for households with young children or elderly family members. We offer two solutions: Bona's anti-slip finish specifically formulated for stair treads (gives you the clean hardwood look with added grip), or a center stair runner with exposed hardwood borders on both sides. Both are popular options in Chicago homes and solve the safety concern without sacrificing the look.

Should I do hardwood upstairs or keep carpet in the bedrooms?

The most common Chicago configuration is hardwood on the main floor and stairs, carpet in the bedrooms — and it's a perfectly sensible choice. Bedrooms with carpet are warmer underfoot, quieter, and feel cozier. If resale value is the priority, hardwood throughout is preferred by buyers. If personal comfort matters more, the mixed approach most Chicago homeowners choose works very well long-term.

What if the hardwood under my carpet is damaged?

It depends on how much damage. Minor damage — a few boards, some staining — can usually be repaired and refinished, often masked with a warm brown stain like Provincial or Weathered Oak. For color matching on old floors, we pull original boards from a closet and use them in the main living area — then install new wood in the closet. Extensive damage may make new installation more cost-effective than repairs.

How long does carpet-to-hardwood refinishing take?

A main floor refinishing typically takes 3–4 days. Carpet-to-hardwood projects run slightly longer due to carpet residue removal and any repairs. Adding stair refinishing adds 1–2 days. New hardwood installation takes 3–5 days depending on subfloor prep needed. We give you a clear timeline at the estimate so you can plan accordingly.

Related Services & Guides

Ready to See What's Under Your Carpet?

We come out for a free estimate, assess the full floor — not just one corner — and give you an honest picture of what's there and what it will cost. No surprises after the carpet comes up.

Get Your Instant Quote → Call or text: 773-790-3887 · Same-day response

Thinking about hiring FLOORecki?

See what Chicago homeowners say about our work.

READ 100+ VERIFIED REVIEWS →

The post Carpet to Hardwood Floors Chicago: Complete Guide 2026 | FLOORecki appeared first on FLOORecki Floors & Stairs | Hardwood Floors & Stairs Chicago.

subfloor Archives | FLOORecki Floors & Stairs | Hardwood Floors & Stairs Chicago